TOP GUN marine fabric is guaranteed for a five (5) year period against excessive loss of color or strength under normal exposure conditions, including sunlight, rot, mildew and atmospheric chemicals. It is manufactured by MarChem Coated Fabrics, 500 Orchard Street, New Haven, MO!


TOP GUN fabric is finished to resist surface growth of mildew, but it should not be folded and stored while wet. Accumulations of dirt and bird droppings which can support growth of mildew and result in fabric staining, should be removed periodically by recommended cleaning methods.

The pigmentation in TOP GUN fabric will not migrate into upholstery vinyls. It some surface rub-off should occur it can easily be removed with vinyl cleaner or mineral spirits. In areas where vigorous scrubbing action will occur during towing, use of a buffer strip is recommended.



TOP GUN Coated Polyester, when used for marine top/cover applications, is guaranteed for a period of five (5) years from date of original installation against:

Excessive loss of color or strength from normal exposure conditions, including sunlight, rot or normal atmospheric chemicals which might render it unserviceable.

In the unlikely event of fabric failure during the five year period we will supply you, the original owner of the top/cover, replacement TOP GUN fabric, free of charge. This warranty does not cover labor, installation or fabrication costs.

This warranty protects you against damage to top/cover used under normal conditions. It does not cover damage from Acts of God; vandalism, neglect or use or care not in accordance with the use and care instructions.

This warranty is in lieu of all warranties expressed or implied and MarChem Coated Fabrics, Inc. will not be liable for any consequential or incidental damage. Any implied warranties imposed by law are limited in time to the duration of the expressed warranty.

Some states do not allow limitations on how long n implied warranty lasts or the exclusion or limitation of incidental or consequential damage, so, the above limitations or exclusion may not apply to you.

This warranty gives the specific legal rights, and you may also have other rights, which vary from state-to-state.


As recommended by MarChem Coated Fabrics, Inc. manufacturer of Top Gun


~Large Capacity Container (30+ gallon) with lid, such as a trash can or something that will not be easily accessible by children or pets. Be sure the container is clean of debris or rust.

~ Bleach 1 gallon bleach: 30 gallons water

~Soft Bristle Scrub Brush

~ All Purpose Cleanser ­ We have found that mild, non-abrasive cleanser WITHOUT bleach such as Fantastik, Mean Green, and etc. work well.

~If your the cover wants to float, put weight on it


To remove any mildew growth and loosen dirt deposits from the surface of the cover, soak it in a solution of bleach water (1 gallon bleach : 30 gallons of water) in a large capacity container with a tight lid for 24-48 hours, depending on the degree of mildew accumulations; rotating every few hours to insure that all areas of the piece are being exposed to the bleach solution. For large pieces, soak one section at a time for maximum exposure. For best results, weight the piece down with jugs of water or the like (something that won¹t bleed on the fabric or degrade in bleach) in order to completely submerge the piece. NOTE: If your cover has any vinyl windows, DO NOT SUBMERGE THEM! Bleach will mar or cloud them permanently. You can, however, soak the areas around the window a little at a time. Contact MarChem Coated Fabrics for further verbal instructions regarding cleaning pieces with windows.

While wet, lay the piece across a clean, flat surface such as a picnic table or driveway and thoroughly scrub the entire surface with an all purpose cleanser. Spray off thoroughly with water several times.

Allow several hours to dry completely. If no refinishing is necessary, treat with AQUA-TITE Silicone Water Repellent.